ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Pad|Front|Page 6109 > < Brake Pad|Specifications
Page 1
background image

Brake Pad: Service and Repair
Front

Brake Pads

Material

Removal

WARNING: Use of any other than approved DOT 3 brake fluid will cause permanent damage to brake components and will render the
brakes inoperative. Failure to follow these instructions may result in personal injury.
 

WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice.
In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety
Data Sheet (MSDS) if available. Failure to follow these instructions may result in personal injury.
 

CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash
it with water.

1. Check the brake fluid level in the brake master cylinder reservoir.

^

If required, remove the fluid until the brake master cylinder reservoir is 1/2 full. 

2. Remove the wheel and tire assembly.

Brake Pad|Front|Page 6109 > < Brake Pad|Specifications