Edge FWD V6-3.5L (2007)
Removal
1. Remove the wheel and tire assembly.
2. CAUTION: Do not allow the brake caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
Remove the 2 brake caliper anchor plate bolts and position the brake caliper and anchor plate assembly aside.
^
Support the brake caliper and anchor plate assembly using mechanic's wire.
3. Remove the brake disc.
Installation
1. Clean and dry the brake disc-to-hub mounting surface and apply a thin coat of anti-seize lubricant where indicated.
2. Install the brake disc onto the wheel hub.
3. Position the brake caliper and anchor plate assembly and install the 2 brake caliper anchor plate bolts.
^
Tighten to 55 Nm (41 ft. lbs).
4. Install the wheel and tire assembly.
5. Test the brakes for normal operation.
Shield Removal and Installation, Front