Edge FWD V6-3.5L (2007)
Camshaft Lobe Lift
Special Tool(s)
1. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft intake/exhaust lobe lift.
^
Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.
^
If out of specification, install new components as necessary.
Camshaft Runout
Special Tool(s)
1. NOTE: Camshaft journals must be within specifications before checking runout.
Using the special tool, measure the camshaft runout.
^
Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading.
^
If out of specification, install new components as necessary.