Edge FWD V6-3.5L (2007)
LH camshafts
110. Compress the LH secondary timing chain tensioner and install a suitable lockpin to retain the tensioner in the collapsed position.
111. NOTE: The VCT bolt and the exhaust camshaft bolt must be discarded and new ones installed. However, the exhaust camshaft washer is reusable.
Remove and discard the LH VCT assembly bolt and the LH exhaust camshaft sprocket bolt.
^
Remove the LH VCT assembly, secondary timing chain and the LH exhaust camshaft sprocket as an assembly.
112. NOTE: When the special tool is removed, valve spring pressure will rotate the LH camshafts approximately 3 degrees to a neutral position.
Remove the special tool from the LH camshafts.
