Edge FWD V6-3.5L (2007)
this procedure can cause future oil leakage.
Apply a 8 mm (0.31 inch) bead of silicone gasket and sealant to the engine front cover-to-LH cylinder head joints.
Part 2
Camshaft
Installation (Steps 44-86)
44. Using a new gasket, install the LH valve cover and 11 stud bolts.
^
Tighten in the sequence shown to 10 Nm (89 inch lbs).
45. NOTE: LH shown, RH similar.
Install the 6 coil-on-plug assemblies and the 6 bolts.
^
Tighten to 7 Nm (62 inch lbs).
46. Attach all of the wiring harness retainers to the LH valve cover and stud bolts.
47. Connect the 3 LH coil-on-plug electrical connectors.