Edge FWD V6-3.5L (2007)
73. Install the catalytic converter bracket bolt and the nut.
1
Tighten the nut to 40 Nm (30 ft. lbs).
2
Tighten the bolt to 55 Nm (41 ft. lbs).
74. Tighten the 2 RH catalytic converter support bracket bolts to 20 Nm (15 ft. lbs).
All vehicles
75. NOTE: Prior to installation of the halfshaft, inspect the halfshaft sealing surface for wear or damage and install new, if necessary.
Install the LH halfshaft into the transaxle.
76. If equipped, connect the oil cooler coolant hoses.
