Edge FWD V6-3.5L (2007)
84. Install the 3 RH lower bumper-to-subframe nuts.
^
Tighten to 10 Nm (89 inch lbs).
85. NOTE: RH side shown, LH side similar.
Install the ball joints in the steering knuckles and install the pinch bolts.
^
Tighten to 63 Nm (46 ft. lbs).
86. NOTE: RH side shown, LH side similar.
Position the stabilizer bar links in the lower control arms and install the nuts.
^
Tighten to 55 Nm (41 ft. lbs).
Part 3
Camshaft