Edge FWD V6-3.5L (2007)
8. Detach all of the wiring harness retainers from the RH valve cover and the stud bolts.
9. Remove the bolt, the 10 stud bolts and the RH valve cover.
^
Discard the gasket.
10. NOTE: VCT solenoid seal removal shown, spark plug tube seal removal similar.
Inspect the VCT solenoid seals and the spark plug tube seals. Remove any damaged seals.
^
Using the special tools, remove the seal(s).
11. Clean the valve cover, cylinder head and engine front cover sealing surfaces with metal surface cleaner.
Installation
1. NOTE: Installation of new seals is only required if damaged seals were removed during disassembly of the engine.
NOTE: Spark plug tube seal installation shown, VCT seal installation similar.
Using the special tools, install new VCT solenoid and/or spark plug tube seals.