Edge FWD V6-3.5L (2007)
47. Using the special tools, remove the engine from the stand.
48. Install the crankshaft sensor ring.
49. Install the flexplate and the 8 bolts.
^
Tighten to 80 Nm (59 ft. lbs).
50. Install the engine in the vehicle.
47. Using the special tools, remove the engine from the stand.
48. Install the crankshaft sensor ring.
49. Install the flexplate and the 8 bolts.
^
Tighten to 80 Nm (59 ft. lbs).
50. Install the engine in the vehicle.