Edge FWD V6-3.5L (2007)
5. Install 2 new bolts and the original washer. Tighten in 4 stages.
^
Stage 1: Tighten to 40 Nm (30 ft. lbs).
^
Stage 2: Loosen one full turn.
^
Stage 3: Tighten to 10 Nm (89 inch lbs).
^
Stage 4: Tighten 90 degrees.
6. Remove the lockpin from the RH secondary timing chain tensioner.
7. NOTE: It is necessary to tilt the special tool toward the rear of the engine to access the rearmost secondary timing chain tensioner bolt.
Install the LH secondary timing chain tensioner and the 2 bolts.
^
Tighten to 10 Nm (89 inch lbs).
8. Assemble the LH VCT assembly, the LH exhaust camshaft sprocket and the LH secondary timing chain.
^
Align the colored links with the timing marks.