Edge FWD V6-3.5L (2007)
38. Install and the transaxle bracket and the 3 bolts.
^
Tighten to 90 Nm (66 ft. lbs).
39. Position the roll restrictor and transaxle bracket plate and install the 3 bolts.
^
Tighten to 90 Nm (66 ft. lbs).
40. Tighten the engine roll restrictor-to-subframe through bolt to 103 Nm (76 ft. lbs).
41. Install the roll restrictor heat shield and the 2 nuts.
^
Tighten to 11 Nm (8 ft. lbs).