Installation Procedure for Timing Cover on Ford Edge FWD V6-35L (2007) - Page 2236
8. Loosen the exhaust flexible pipe clamp and disconnect the 2 exhaust hangers.
9. Remove the 4 nuts, the exhaust flexible pipe and the Y-pipe as an assembly.
^
Discard the nuts and the gasket.
10. Remove the 2 nuts and the roll restrictor heat shield.
11. Remove the roll restrictor through bolt and the 2 roll restrictor-to-transaxle bracket plate bolts.
12. Loosen the roll restrictor-to-subframe through bolt.
^
Position the roll restrictor and transaxle bracket plate aside.