Edge FWD V6-3.5L (2007)
Cabin Temperature Sensor / Switch: Service and Repair
IN-VEHICLE TEMPERATURE SENSOR
Removal and Installation
1. Remove the 2 lower steering column opening cover bolts.
2. Detach the lower steering column opening cover.
3. Disconnect the in-vehicle temperature sensor aspirator hose.
4. Disconnect the in-vehicle temperature sensor electrical connector.
5. Release the 2 in-vehicle temperature sensor clips and remove the in-vehicle temperature sensor.
6. NOTE: The in-vehicle temperature sensor hose and venturi assembly can be accessed from below the driver side of the instrument panel.
Remove the in-vehicle temperature sensor hose and venturi assembly.
7. To install, reverse the removal procedure.
