Edge FWD V6-3.5L (2007)
G4
Normal Operation
The steering angle sensor module communicates with the scan tool through the high speed controller area network (HS-CAN). Circuits VDB04
(WH/BU) (HS-CAN +) and VDB05 (WH) (HS-CAN -) provide the network connection to the steering angle sensor module. The steering angle sensor
module shares the HS-CAN network with the PCM, the ABS module, the four wheel drive (4WD) control module (if equipped), the restraints control
module (RCM), the occupant classification sensor module, the adaptive front lighting module (if equipped) and the instrument cluster. Voltage to the
steering angle sensor module is supplied by circuit CBP34 (VT/BN). Ground is supplied by circuit GD115 (BK/GY).
This pinpoint test is intended to diagnose the following:
-
Fuse
-
Wiring, terminals or connectors
-
Steering angle sensor module
Test H: The Instrument Cluster Does Not Respond To The Scan Tool
PINPOINT TEST H: THE INSTRUMENT CLUSTER DOES NOT RESPOND TO THE SCAN TOOL
