Edge FWD V6-3.5L (2007)
10. Remove the roll restrictor bolt and rotate the engine forward.
^
To install, tighten to 90 Nm (66 ft. lbs).
11. Remove the 2 bracket-to-RH catalytic converter bolts.
^
To install, tighten to 20 Nm (15 ft. lbs).
12. Remove the 4 nuts and the RH catalytic converter.
^
Discard the 4 RH catalytic converter nuts and gasket.
^
To install, tighten to 40 Nm (30 ft. lbs).
13. To install, reverse the removal procedure.
^
Install a new gasket and nuts.
