Edge FWD V6-3.5L (2007)
1. Release the fuel system pressure.
2. Disconnect the battery ground cable.
3. Release the fuel tank filler cap and position aside.
4. Insert a suitable fuel drain tube into the fuel tank filler pipe until it reaches the fuel tank inlet spout.
5. Attach the fuel storage tanker to the fuel drain tube and remove any residual fuel remaining in the fuel tank filler pipe.
6. Remove the rear seat.
7. Position the carpet and/or any insulation covering the fuel pump (FP) module access cover aside.
8. Remove the 4 screws and the FP module access cover.
9. Disconnect the FP module electrical connector.
10. Disconnect the fuel tank supply tube-to-FP module quick connect coupling.
