Edge FWD V6-3.5L (2007)
4. CAUTION: Do not handle the solenoid body in the leadframe area or by the screens of the solenoid body filter or damage to the solenoid
body can occur.
CAUTION: Use care not to break the alignment tabs when installing the solenoid body filter. Damage to the transaxle will occur if the
solenoid body is not correctly aligned.
CAUTION: Make sure that the filter passage areas are clean of foreign material before installing the filter. Damage to the transaxle will
occur if the filter passages are not clean.
Install a new solenoid body filter assembly by pushing it straight down on to the alignment tabs.
5. CAUTION: Make sure not to pinch the TSS, OSS or TR sensor wiring harnesses when installing the solenoid body. Damage to the wiring
harness will occur.
NOTE: Install the different length bolts in the locations noted during disassembly.
Install the solenoid body and the 11 bolts.
1
42 mm (1.65 inch) bolt
2
63 mm (2.48 inch) bolts
3
80 mm (3.14 inch) bolts
4
95 mm (3.74 inch) bolts
