Edge FWD V6-3.5L (2007)
Trunk / Liftgate Switch: Service and Repair
Liftgate Release Switch - Power
LIFTGATE RELEASE SWITCH - POWER
Removal and Installation
1. Remove the liftgate trim panel.
2. Disconnect the liftgate release switch electrical connector.
3. Remove the 2 liftgate release switch moulding bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
4. Depress the tabs and remove the liftgate release switch.
5. To install, reverse the removal procedure.