Edge FWD V6-3.5L (2007)
7. NOTE: Outboard front cross brace screws shown, inboard similar.
On the side with the affected OCS I-bolt(s), remove the 2 front cross brace screws.
8. On the side with the affected OCS weight sensor bolt(s), disengage the seat adjuster handle spring and position it aside.
9. Separate the seat adjuster handle from the affected side of the seat track rail with the OCS weight sensor bolt(s).
10. NOTE: Outboard rear cross brace screws shown, inboard similar.
On the side with the affected OCS weight sensor bolt(s), remove the 2 rear cross brace screws.
