Edge FWD V6-3.5L (2007)
15. Position the wheel speed sensor, clip the 2 retainers to the upper arm and install the bolt.
^
Tighten to 7 Nm (62 inch lbs).
16. NOTE: The parking brake cable bracket is fastened to the wheel knuckle with the same bolt as the stabilizer bar link.
Install the parking brake cable bracket and the stabilizer bar link to the wheel knuckle.
^
Tighten the bolt to 35 Nm (26 ft. lbs).
17. Connect the parking brake cable and install the 2 bolts.
^
Tighten to 18 Nm (13 ft. lbs).
18. Install the parking brake shoe and retaining spring.
19. Install the brake disc.
20. Position the brake caliper and anchor plate assembly and install the anchor plate bolts.
^
Tighten to 55 Nm (41 ft. lbs).
21. Install the wheel and tire assembly.
