Edge FWD V6-3.5L (2007)
8. Install the transmission fluid drain plug.
^
Tighten to 9 Nm (80 inch lbs).
9. NOTE: The coolant hoses do not need to be removed from the engine.
Remove the coolant hoses from the transmission fluid filler tube and position aside.
10. NOTE: The coolant hoses have been removed for clarity.
Remove the transmission fluid level indicator.
11. NOTE: The coolant hoses have been removed for clarity.
Remove the nut, rotate the transmission fluid filler tube counterclockwise 90 degrees and remove the transmission fluid filler tube.