Edge FWD V6-3.5L (2007)
Installation
1. Install a new halfshaft seal on the special tool.
2. Using the special tool, install the RH halfshaft seal.
3. Position the RH halfshaft and intermediate shaft support bracket in the transaxle and in the steering knuckle. Install the 1 stud bolt and 1 bolt.
^
Tighten to 55 Nm (41 ft. lbs).
4. Position the catalytic converter support bracket in place and install the bolt and the nut.
1
Tighten the nut to 40 Nm (30 ft. lbs).
2
Tighten the bolt to 55 Nm (41 ft. lbs).