Edge FWD V6-35L: Replacing Turbine Shaft Speed Sensor (2007)
14. Inspect the transaxle case to make sure that the transmission fluid cooler tube seal and backing ring were removed with the transmission fluid
cooler tube and are not stuck in the transaxle case. If the transmission fluid cooler tube seal or backing ring are stuck in the transaxle case, remove
the seal and backing ring.
15. Disconnect the transaxle electrical connector.
16. Remove the 2 nuts, pull the transmission fluid cooler thermal bypass valve straight up and position it aside.
17. NOTE: Note the location of the of the stud bolts for assembly.
Remove the 14 bolts and the transaxle side cover.
