Service and Repair of Turbine Shaft Speed Sensor for Edge FWD V6-35L (2007) Transmission
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the mass air flow (MAF) sensor electrical connector and the wiring harness fastener from the air cleaner assembly.
3. Disconnect the brake booster vacuum hose from the air cleaner outlet pipe.
4. Disconnect the engine breather from the air cleaner assembly.
5. Remove the air cleaner assembly bracket bolt.
