Edge FWD V6-3.5L (2007)
11. Position the transmission fluid cooler thermal bypass valve and transmission fluid cooler tube assembly in place and install the 2 nuts.
^
Tighten to 11 Nm (8 ft. lbs).
12. Connect the transaxle electrical connector.
13. Inspect the transmission fluid cooler tube backing ring and seal for damage and install a new backing ring or seal if necessary. Lubricate the
transmission fluid cooler tube seal with clean automatic transmission fluid and install the backing ring and seal on the transmission fluid cooler
tube.
14. Position the transmission fluid cooler tube in place and install the bolt.