Edge FWD V6-3.5L (2007)
Windshield: Procedures
WINDSHIELD RESEAL
Material
1. Remove the cowl panel grille.
2. Position the LH and RH weatherstrips aside.
3. Remove the LH and RH A-pillar trim panels.
4. Remove the LH and RH sun visors.
5. If equipped, remove the overhead console.
6. Lower the front portion of the headliner and block with a suitable material.
7. Clean the interior and exterior of the windshield glass surface with glass cleaner.
Material
8. Cut the urethane adhesive applicator tip to 6 mm (0.24 in).