Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may result
in damaged components.
6. Install the seat track to floor nuts.
7. Disconnect the battery ground cable and wait at least one minute.
Vehicles with side air bag
8. Remove the special tool from the passenger seat side air bag module body harness electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
9. Connect the passenger seat air bag module electrical connector.
All vehicles