Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
4. Using the special tool, measure the brake drum inside diameter.
^
Install a new brake drum if the maximum inside diameter exceeds the specification shown on the outside of the brake drum.
Installation
1. NOTE: If adjusting the rear brakes, refer to Brake Shoe Adjustment.
Position the brake drum on the vehicle.
2. WARNING: Whenever a wheel is installed, always remove any corrosion, dirt or foreign material present on the mounting surfaces of
the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Installing wheels without correct
metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while the vehicle is in
motion, causing loss of control. Failure to follow these instructions may result in personal injury.
Clean the wheel hub mounting surface and wheel pilot.
3. Install the tire and wheel assembly.
