Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Camshaft Gear/Sprocket: Service and Repair
NOTE:Ford does not provide camshaft gear timing marks, or information to perform timing belt service without the special tools shown
in this procedure.
Timing Drive Components-Timing Sprockets
Special Tool(s)
Removal
1. Remove the timing belt.
2. Raise and support the vehicle.
3. CAUTION: The camshaft alignment tool is not recommended to hold the camshafts in place when removing or tightening the bolts. Damage to
camshaft may result.
NOTE: Use an open-end wrench to keep each camshaft from rotating.
Remove the bolts and the camshaft timing sprockets.
Installation
1. Install the camshaft sprockets onto the camshafts and loosely install the bolts.
2. Raise and support the vehicle.