Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
8. CAUTION: The camshaft alignment tool is not recommended to hold the camshafts in place when removing or tightening the bolts. Damage to
camshaft may result.
NOTE: Use an open-end wrench to keep each camshaft from rotating.
Tighten the camshaft timing sprocket bolts to specifications.
9. Raise and support the vehicle.
10. Install the front mount lower bracket.
11. Install the lower timing belt cover.
12. Install the accessory drive belt idler pulley.