Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Refrigerant: Service and Repair
Identifying Refrigerants
Delux A/C Refrigerant Analyzer
SPECIAL TOOL(S)
1. Follow the instructions included with the refrigerant analyzer to obtain the sample for testing.
NOTE: Prior to recovering or charging the refrigerant system, you must use an A/C refrigerant analyzer to identify gas samples taken directly
from the refrigeration system or storage containers.
2. The analyzer will display one of the following:
^
A green "PASS" Light Emitting Diode (LED) will light if the purity of the R-134, R-12 or the R-22 is better than 98% by weight.
^
A red "FAIL" LED will light if the purity of the gases does not meet the 98% purity standard.
^
A red "FAIL" LED and "HYDROCARBON" light will illuminate and a horn will sound if a hydrocarbon is detected above 5%. This will alert
the user of potential hazards.
3. If contaminated refrigerant is detected, DO NOT recover the refrigerant into your recovery/recycling equipment.