Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
6. Remove the remote canister vent hose and the dust separator.
7. Remove the canister vent solenoid.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carry out a leak test. See: Testing and Inspection/Component Tests/Evaporative Emission System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Component Tests/Evaporative Emission Repair
Verification Drive Cycle
NOTE: Lubricate all O-ring seals with MERPOL(R) O-Ring Seal Lubricant meeting Ford specification ESE-M99B144-B or equivalent.
