Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
6. Disconnect the fuel pulse damper vacuum hose.
7. Disconnect the fuel injector electrical connectors.
8. Remove the bolts and remove the fuel supply manifold.
9. Inspect the O-ring seals. Discard if damaged
INSTALLATION
1. To install, reverse the removal procedure.
CAUTION:
^
Use O-ring seals made of fuel-resistant material. Use of incorrect O-ring seals may result in fuel leakage.
^
Never use silicone grease. Silicone grease may clog fuel injectors.
NOTE: Lubricate the O-ring seals with clean Super Premium SAE 5W-30 Motor Oil XO-5W30-QSP or equivalent meeting Ford specification