Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
a.
Open the left rear door.
b.
Position the seat bench forward.
c.
Pull back the carpet to expose the fuel pump module access cover.
d.
Remove the screws and lift the access cover up, then disconnect the two electrical connectors.
4.
Disconnect the outboard fuel line (the one closest to the door). See Figure 2.
5.
Raise and support the vehicle.
6.
Position a drain pan. Remove the bundle retainer, then disconnect the fuel line at the filter and at the supply line. See Figure 3.
7.
Remove the line from the vehicle noting the path of the fuel line around other components.
8.
Position the new fuel line in the vehicle.