Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
![background image](/ford/escape_2wd/l4-122_2.0l_dohc_vin_b_sfi/Page-334002.png)
COMPONENT TESTING PROCEDURE (Voltage Applied)
Disconnect the ohmmeter; connect pins 2 and 3 to 12V DC power and pin 1 to ground. Measure voltage between pin 5 and pin 1. If the voltage is 12V,
continue with the test. If not, replace the relay. Disconnect power from pin 2 and measure voltage between pin 4 and pin 1. If the voltage is 12V, the
relay is okay. If not, replace the relay.