Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
4. Attach the restraint system diagnostic tool to the clockspring electrical connector at the top of the steering column.
5. Open the glove box past its stops.
6. Through the glove box opening toward the center of the instrument panel, disconnect the passenger air bag module electrical connector.
1
Push to release the passenger air bag module electrical connector locking clip.
2
Disconnect the passenger air bag module electrical connector.
7. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector.
8. Disconnect the passenger safety belt buckle pretensioner electrical connector.
1
Remove the passenger safety belt buckle pretensioner electrical connector from the bracket under the seat.
2
Push to release the passenger safety belt buckle pretensioner electrical connector locking clip.
3
Disconnect the passenger safety belt buckle pretensioner electrical connector.