Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
![background image](/ford/escape_2wd/l4-122_2.0l_dohc_vin_b_sfi/Page-2333011.png)
VEHICLE SAFETY STANDARDS.
21. Connect the driver air bag module electrical connector.
22. Install the steering wheel access cover.
23. Connect the battery ground cable.
24. With all the restraint system diagnostic tools removed, prove out the air bag system. See: Air Bag(s) Arming and Disarming/Service and
Repair/Prove Out Procedure
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
Vehicles Without Side Air Bags
Special Tool(s)
SPECIAL TOOL(S)
REMOVAL