Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
9. Remove the tape applied during clockspring removal.
NOTE: When the tape is removed, do not allow the clockspring to turn.
All vehicles
10. Align the clockspring for installation.
^
Align the large slot to the large tab in the clockspring.
^
Align the small slot to the small tab in the clockspring.
NOTE: The clockspring is shown from the back for clarity.
11. Install the clockspring.
1
With the slots and tabs aligned, slide the clockspring over the steering column.
2
With the clockspring sitting flush against the multi-function switch, install the screws.