Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
a)
Securely insert the hooked end of the buckle cover removal tool into the buckle assembly as shown. See Figure 1.
b)
While sitting in the seat, firmly pull the tool up and away from the seat and center console to separate the safety belt buckle cover halves.
2.
Buckle Operation Check 1:
With both front safety belt covers removed, verify the operation of both safety belt buckles.
a)
Insert the safety belt tongue into the buckle. Make sure the buckle makes a "click" noise.
b)
Pull on the safety belt to make sure it is securely locked in the buckle.
c)
Push the buckle release button and make sure the buckle releases the safety belt.
d)
If the buckle fails to securely lock and retain the safety belt, call the Special Service Support Center at 1-800-325-5621.
3.
Buckle Cover Installation:
CAUTION:
Do not overtighten the screws.
NOTE:
Verify that the plastic anti-rattle spring is in place on the lower cover prior to installation. See Figure 2.
NOTE:
Replacement buckle covers go together more easily when the upper cover is positioned first (inboard side), and the lower cover positioned second
(outboard side).
