Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
![background image](/ford/escape_2wd/l4-122_2.0l_dohc_vin_b_sfi/Page-2053001.png)
Steering Gear: Testing and Inspection
Steering Gear Grunt/Shudder Test
1. Start and run the vehicle to operating temperature.
2. Set engine idle speed to 1,200 rpm.
3. Rotate the steering wheel to the RH stop, then turn the steering wheel 90 degrees back from that position. Turn the steering wheel slowly in a 15
to 30 degree arc.
CAUTION: Do not hold the steering wheel against the stops for more than three to five seconds at a time. Damage to the power steering pump
will occur.
4. Turn the steering wheel another 90 degrees. Turn the steering wheel slowly in a 15 to 30 degree arc.
5. Repeat the test with power steering fluid at different temperatures.
6. If a light grunt is heard or a low (50-200 Hz) shudder is present, this is a normal steering system condition.
7. If a loud grunt is heard or a strong shudder is felt, fill and purge the power steering system.