Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
C. Apply Motorcraft Silicone Brake Caliper Grease and Dielectric Compound. (Figure 1)
(1) To the entire length of the chrome strut rod above the jounce bumper and 360 degrees around the rod.
(2) To the top and sides of the uppermost part of the dust boot.
(3) Apply 360 degrees to the jounce bumper itself.
d. Assemble front strut and install per WSM, Section 204-01.
e. Repeat the procedure on the other side of the vehicle.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
090605A
2001-2009 Escape,
0.7 Hr.
2005-2009 Escape Hybrid, Mariner
2006-2009 Mariner
Hybrid: Apply Grease
Following Service
Procedure. Includes Time
To Evaluate Noise With
Chassis Ears and Road
Test (Do Not Use With
1007D, 18124A)
090605B
2001-2009 Escape,
1.5 Hrs.
2005-2009 Escape Hybrid,
Mariner, 2006-2009
Mariner Hybrid: Replace
The Strut Dust Boots,
Apply Grease Following
Service Procedure.
Includes Time To Evaluate
Noise With Chassis Ears
and Road Test Can Be
Claimed With Operations C
And D (Do Not Use With
1007D, 18124A)
090605C
2001-2009 Escape,
0.6 Hr.
2005-2009 Escape Hybrid,
Mariner, 2006-2009
Mariner Hybrid: Check
Caster, Camber and,
Toe-In Can Be Claimed
With Operation B And D
(Do Not Use With 2001B,
2001B1, 2001B5, 2001B8,
2219D, 2219D2, 3185B,
3001A, 3001A6F)
090605D
2001-2009 Escape,
0.6 Hr.
2005-2009 Escape Hybrid,
Mariner, 2006-2009
Mariner Hybrid: Correct
Caster, Camber And