Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
11.
Install the center bearing support ground strap to the floor pan. Tighten the bolt to 40 Nm (30 lb-ft).
NOTE:
If front driveshaft bolts are missing or damaged, order Part Number YL8Z-4529-AA, quantity of one (1).
12.
Install new bolts and washers to secure the front of the driveshaft to the power take off. Tighten the bolts to 37 Nm (27 lb-ft).
13.
Remove the safety stand from under the center bearing support.
14.
Lower the vehicle.