Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
5. Remove the front-to-aft crossmember.
1. Remove the splash shield screw.
2. Remove the bolts and the nut.
3. Remove the front-to-aft crossmember.
6. To install, reverse the removal procedure.
5. Remove the front-to-aft crossmember.
1. Remove the splash shield screw.
2. Remove the bolts and the nut.
3. Remove the front-to-aft crossmember.
6. To install, reverse the removal procedure.