Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley
Removal and Installation
1. Raise and support the vehicle.
2. Remove the RF wheel and tire assembly.
3. Remove the bolts and the RH lower splash shield.
4. Loosen the bolt retaining the crankshaft pulley.
5. Remove the accessory drive belt.
6. Remove the bolt and the crankshaft pulley.
7. To install, reverse the removal procedure.