Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Oil Cooler: Service and Repair
Oil Cooler
Removal and Installation
1. Drain the engine coolant.
2. Remove the oil filter.
3. Remove the oil cooler.
^
Disconnect the coolant hoses.
^
Remove the cooler mounting bolt.
4. CAUTION: The oil cooler sealing surfaces are soft metals. Do not use abrasive grinding discs to remove gasket material; only use manual
scrapers. Do not scratch or gouge sealing surfaces or oil leaks may occur.
Carefully clean the sealing surfaces.
^
Install a new oil filter.
5. To install, reverse the removal procedure.