Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
NOTE: Vehicles with 2.0L Zetec engine shown, vehicles with 3.0L (4V) engine similar.
11. Remove the A/C manifold and tube assembly through the bottom of the vehicle.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the O-ring seals with PAG Compressor Oil YN-12-C or equivalent meeting Ford specification WSH-M1C231-B.
^
Apply Pipe Sealant with Teflon (R) D8AZ-19554-A or equivalent meeting Ford specifications WSK-M2G350-A2 and ESR-M18P7-A to the
threads of the A/C manifold retaining bolt.
