Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
10. Remove the lower shock absorber nut.
11. NOTE: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.
Separate the lower ball joint from the wheel knuckle.
1
Remove the nut.
2
Separate the lower ball joint from the wheel knuckle.
12. NOTE: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.
Separate the upper ball joint from the wheel knuckle.
1
Remove the nut.
2
Separate the upper ball joint from the wheel knuckle.
13. NOTE: Note the position of the spring insulator and spring for installation.
Remove the spring.
^
Lower the support to the wheel knuckle.