Escape 2WD L4-2.3L VIN Z (2005)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch Remote Control
LIFTGATE LATCH REMOTE CONTROL
Removal and Installation
1. Remove the liftgate trim panel.
2. Disconnect the liftgate latch remote control actuating rods.
1
Open the clip and disconnect the liftgate window latch actuating rod.
2
Open the clip and disconnect the liftgate latch actuating rod.
3. Open the clip and disconnect the liftgate handle actuating rod.
4. Disconnect the electrical connectors.
1
If equipped, disconnect the liftgate latch actuator electrical connector.
2
Release the liftgate window latch ajar switch wiring harness locator.