Escape 2WD L4-2.3L VIN Z (2005)
Exhaust Resonator: Service and Repair
Resonator
Removal and Installation
NOTE: Do not use oil or grease-based lubricants on the insulators. They may cause deterioration of the rubber.
NOTE: Oil or grease-based lubricants on the insulators may cause the exhaust hanger insulator to separate from the exhaust hanger bracket during
vehicle operation.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove and discard the 2 resonator nuts.
^
To install, tighten to 47 Nm (35 ft. lbs.).
3. Remove and discard the resonator exhaust hanger and remove the resonator.
4. To install, reverse the removal procedure.
^
Install a new resonator gasket.