Escape 2WD L4-2.3L VIN Z (2005)
4. Use a threaded insert (N807170-S190) provided in D-Ring Installation Kit 100-F012 (134-00018) or equivalent and screw it into the retapped hole
until it is slightly below the surface of the hole.
5. NOTE: If the two hex-head bolts on the front seat shoulder strap adjuster are not stripped, refer to Safety Belt Shoulder Height Adjuster to install
the height adjuster to the body. If the front seat shoulder strap adjuster bolts are stripped, install a new adjuster.
Use a hammer to lightly tap the installation tool provided in D-Ring Installation Kit 100-F012 (134-00018) several times to drive down the insert
keys.
